WW-600-RCT-D1 High Efficiency Cyclone Collector


The Extract-All™ 600 Series cyclone systems are smaller size dust collectors, designed for a wide range of light, multiple wheel grinding and buffing operations , as well as single large machines. They are available in ten models; three single stage cyclone models and seven 2-stage systems. Combining the simplicity and efficiency of centrifugal precipitation of dust from the air stream, they provide the user with unmatched operating economy and are virtually maintenance-free. There are no filter cartridges required, no cartridge replacement expense.

300 to 550 C.F.M. at pressure requirements to 5.25″.

2.75 to 14.7 cubic feet. Outside vented or air-recirculating  types.

• ¾ HP 3600 RPM TEFC continuous-duty industrial motor
• Drum Cover and Clamp Arrangement
• Motor/Blower Support Frame
• Filter Tubes and Bag House

Receive free shipping on this item.

• High efficiency cyclone design
• Spark-resistant, aluminum alloy, direct drive fan wheel
• Compact unit design
• Powder coated, durable long-lasting finish
• Heavy duty industrial grade construction
• TEFC continuous-duty industrial motor
• Second-stage cotton sateen tube-type filters for lower air-to-cloth ratio for efficient collection of fine particulate
• Allows air to be recirculated, where allowed
• Space saving vertical tube after-filter design above cyclone conserves use of floor space.

INLETS: 5", 4", or two 4, or two 3"
RATINGS: 200 to 600 CFM at 5.25” to 2" SP
MOTOR: ¾ hp 3600 RPM TEFC continuous-duty industrial motor 
VOLTAGE: 115 single phase, or 208, or 230/460, three phase, 60 cycle
FILTER: Second-stage cotton sateen tube-type filters for lower air-to-cloth ratio for efficient collection of fine particulate
NOISE LEVEL: 70.4 dBA @ 4’ / 67.8 dBA @ 12’
RECOMMENDED OPERATING RANGE: 300 to 550 CFM at pressure requirements to 5.25"
STANDARD DIMENSIONS: 42”L (Inlet side) x 30”W x 152”H
WEIGHT: 600 lbs.

GRINDING: "MG" types recommended. Surface or cutter grinders: accommodates up to two machines located adjacent to each other. Either one surface grinder with 10" to 12" wheel or two pedestal grinders with 8" to 10" wheels.
BUFFING OR POLISHING: "WW" types recommended. Up to two 10" wheels.
WOODWORKING: "WW" types recommended. Saws:  10" to 12"; Shapers: smallest; Jointers: 6" to 8''; Planers: 12" on light duty; 2 smaller machines, closely grouped on moderate duty.

Bakery Processing