WW-1100-RCT-D1 High Efficiency Cyclone Collector 1

WW-1100-RCT-D1 High Efficiency Cyclone Collector

$9,529.00

The Extract-All™ 1100 Series dust collectors deliver high efficiency performance eliminating process dust from industrial grinding, buffing, polishing and wood­ working operations. Combining the simplicity and efficiency of centrifugal precipitation of dust and pollutants from the air stream, they provide the user with unmatched operating economy and are virtually maintenance-free. Series 1100 models are available in three single stage cyclone units, and eight 2-stage systems. No filter cartridges are required; no cartridge replacement expense.

RECOMMENDED OPERATING RANGE:
600 to 1100 C.F.M. at pressure requirements to 6.2″.

DUST STORAGE CAPACITY:
3 to 14.7 cubic feet. Outside vented or air-recirculating types.

Includes:
• 1 ½ HP 3600 RPM TEFC continuous-duty industrial motor
• Drum Cover and Clamp Arrangement
• Motor/Blower Support Frame
• Filter Tubes and Bag House

Receive free shipping on this item.

• High efficiency cyclone design
• Spark-resistant, aluminum alloy, direct drive fan wheel
• Compact unit design
• Powder coated, durable long-lasting finish
• Heavy duty industrial grade construction
• TEFC continuous-duty industrial motor
• Second-stage cotton sateen tube-type filters for lower air-to-cloth ratio for efficient collection of fine particulate
• Allows air to be recirculated, where allowed
• Space saving vertical tube after-filter design above cyclone conserves use of floor space.

INLETS: 6", 5", or two 4, or two 4"
OUTLET DIAMETER: 8”
RATINGS: 200 to 1100 CFM at 7.4” to 1" WG
MOTOR: 1 ½ HP 3600 RPM TEFC continuous-duty industrial motor 
VOLTAGE: 208, 230/460, three phase, 60 cycle. Single phase motors also available.
FILTER: Second-stage cotton sateen tube-type filters for lower air-to-cloth ratio for efficient collection of fine particulate
NOISE LEVEL: 74.7 dBA @ 4’ / 70.8 dBA @ 12’
RECOMMENDED OPERATING RANGE: 600 to 1000 CFM at pressure requirements to 6.2"
STANDARD DIMENSIONS: 42”L (Inlet side) x 30”W x 147.5”H
WEIGHT: 621 lbs.

GRINDING: "MG" types recommended.  Surface tool or cutter grinder; up to three in simultaneous operation, closely grouped.  Pedestal grinders: 2" to 19" wheels. Small wheels: Combinations of wheels up to approx. three 4" connections or four 3" connections, closely grouped.
BUFFING OR POLISHING:"WW" types recommended. Up to two 16" wheels.  Smaller wheels: Combinations of wheels up to approx. three 4" connections or four 3" connections, closely grouped.
WOODWORKING:"WW" types recommended. Saws: 14" to 20"; planer up to 16". Smaller machines: up to two 4" connections or three 3" connections, closely grouped.

Grinding
Buffing
Polishing
Woodworking
Shredding
Bakery Processing