MG-400-RC Air-Recirculating Cyclone Collector 1
MG-400-RC Air-Recirculating Cyclone Collector 2MG-400-RC Air-Recirculating Cyclone Collector 3MG-400-RC Air-Recirculating Cyclone Collector 4MG-400-RC Air-Recirculating Cyclone Collector 5MG-400-RC Air-Recirculating Cyclone Collector 6

MG-400-RC Air-Recirculating Cyclone Collector


The Extract-All™ 400 Series air-recirculating cyclone collectors offers the best of both worlds for eliminating dust from grinding, buffing and other processing operations . Combining the simplicity of the cyclone, with its efficient centrifugal precipitation of dust from the air stream, and the Extract-All™ compact unit design for servicing smaller machines, the 400 Series requires a minimum of shop space and fits easily in crowded areas. They are unmatched for operating economy; require little, if any maintenance. No filter cartridges needed; no cartridge replacement expense.

200 to 400 C.F.M. at pressure requirements to 3.5″.

1.0 to 7.3 cubic feet.

• ⅓ HP 3600 RPM TEFC continuous-duty industrial motor
• Dust bin drawer storage container for easy cleanout
• Two-stage fiberglass after-filter

Receive free shipping on this item.

• High efficiency cyclone design
• Spark-resistant, aluminum alloy, direct drive fan wheel
• Compact unit design
• Powder coated, durable long-lasting finish
• Heavy duty industrial grade construction
• TEFC continuous-duty industrial motor

INLETS: 4”, 3”, or two 3”
RATINGS: 200 to 400 CFM at 3.5” to 2.2” SP
MOTOR: ⅓ HP 3600 RPM TEFC continuous-duty industrial motor
VOLTAGE: 115, single phase or 208 or 230/460, three phase, 60 cycle
EXHAUST: Up-blast exhaust
FILTER ACCESS: Two-stage fiberglass after-filter with Dust bin drawer storage container for easy clean out
NOISE LEVEL: 69.9 dBA @ 4’ / 66.4 dBA @ 12’
RECOMMENDED OPERATING RANGE: 200 to 400 CFM at pressure requirements to 3.5”
DUST COLLECTOR DIMENSIONS: 23”L (Inlet side) x 18”W (Bin Drawer side) x 24”H
WEIGHT: 106 lbs.