July 22, 2022

Remove Indoor Air Quality Occupational Risk For Plastics Industry Workers

Share This Post

Remove Indoor Air Quality Occupational Risk For Plastics Industry Workers

Workers are exposed to a variety of fumes as part of heating and molding  processes in the plastics industry during plastics manufacturing.

As a versatile material, plastics is used to make packaging and containers, to ensure quality smartphone manufacturing and for a variety of other applications. There are over 1.1 million employees in the plastics industry, according to the Occupational Safety and Health Administration.

These workers commonly come into contact with chemical fumes that are emitted during raw material manufacturing and plastics processing. As plastics come in the form of granules, powders or pellets, there are certain ways to mold or shape these materials into products. For the plastics manufacturing process, the material has heat or pressure applied to the plastic or the plastic resins are combined with additives, including fillers and pigments, according to Health and Safety Executive.

Sources of Plastics Fumes

One of the main plastic-making processes employed by manufacturers is thermoplastic injection molding, which heats plastic pellets until they are melted so they can be shaped by a mold to form products. As workers perform these manufacturing procedures, they are at risk for being exposed to fumes from the plastics either from the machines used for manufacturing or the plastics materials themselves.

“The primary sources of emissions at plastic products manufacturing facilities are the pieces of equipment (e.g., extruder hopper, die head, sander) used to handle raw materials and produce the final product,” according to the Environmental Protection Agency. “These are typically the locations where chemical reactions occur, liquid solvents and solvent blends are exposed to the atmosphere, solid resin is heated and melted, and additives are introduced.”

The level of fume exposure during the process varies but it is usually dependent on the type of operating procedure and the material that is being produced. Workers may find themselves exposed to different kinds of fumes during plastics processing, including hydrogen chloride from PVC plastic and formaldehyde from acetals. When heat is applied to it, pure PVC breaks down to form hydrochloric acid gas. Fumes from plastics can irritate the lungs and are even thought to be cancer-causing.

Types of Emissions From Plastic Manufacturing

Employees can also come into contact with plastics fumes while handling thermoforming resins, which could generate volatile organic compounds (VOC) and hazardous air pollutant (HAP) emissions. These are byproducts of the chemical reactions of heating resins and are also emitted by additives, a secondary material in the process. In addition to VOCs and HAP emissions, particulate matter can also form while workers handle raw materials through grinding or cutting or other finishing procedures for plastic production.

To help control the presence of fumes, HSE recommends implementing local exhaust ventilation (LEV). This engineering control can include fume extraction equipment such as extractors, which can be effective in case plastic film sticks and overheats or other instances where heating processes can endanger workers. Aging machines can also pose a risk to workers if their processing controls are unpredictable.

OSHA also recommends adequate ventilation and fume extraction systems so workers do not inhale gases that could cause long term health effects.

Industrial and manufacturing news brought to you by Air Impurities Removal Systems, Inc.

Other Related Blog Posts

February 7, 2022

Occupational PAH Exposure to Polycyclic Aromatic Hydrocarbons in the Workplace

.
February 14, 2022

The Unseen Occupational Hazard At Shopping Malls

.
February 21, 2022

For a Healthy Indoor Air Quality Source Capture Ventilation is Key

.
March 7, 2022

Indoor Air Quality Concerns for Laser Marking Fumes

.
March 14, 2022

Indoor Air Quality Considerations & Airport Smoking Lounges

.
March 21, 2022

The Occupational Risk: Toxic Benzene Chemical Exposure

.
March 28, 2022

Understanding How Positive / Negative Pressure Machines Are Used in Healthcare

.
April 11, 2022

Mold Causes Significant Indoor Air Quality Problems in Libraries

.
April 18, 2022

Dental Aerosol Contamination Management and Indoor Air Quality Measures

.
April 25, 2022

Best Practices for Pharmaceutical Manufacturers Includes Indoor Air Quality Controls

.