SUPER VERSATILE EXTRACT-ALL MODEL S-987-2/S-987-2A COMPACT AIR CLEANING SYSTEM
The Extract-All Model S-987-2/S-987-2A compact air
cleaning system gives you a safer, healthier workplace by
capturing and removing contaminants at the source. The
system collects and filters smoke, dust, and odors from:
soldering
solvents
mixing powders and chemicals
light welding, sanding, and grinding
dental grinding
jewelry buffing
heat bending
wire stripping
and many other light to moderate industrial and laboratory
activities.
MOUNTING VERSATILITY
You can mount the S-987-2/S-987-2A vertically or horizontally on bench top or floor. Or, order the optional caster base for portable use.
SOURCE CAPTURE VERSATILITY
Each system comes standard with:
Inlet cover with two 2-1/2" diameter, self-supporting articulating extractor arms plus a cap to close off the unused inlet, if only one arm is used.
Arms are made of heavy-duty, chemical, abrasion, and heat resistant polypropylene with fl ame retardant characteristics. Reach is from 36" to 53". If you prefer to remove the standard prefabricated hoods, the ends of the arms can be fl ared up to 3-3/4" in diameter or as small as 2" in diameter.
Slotted inlet cover for use as a backdraft/
downdraft pickup.
Slotted inlet cover options include 6" deep full hood, and/or partial hood and two
intake-limiting covers (the partial hood may be positioned above, between, or below the
covers). Hoods are acrylic; hoods and covers attach with magnets.
Acrylic Exhaust Deflector which diverts air away from the work
area. Attaches with magnets.
All data has been obtained under controlled conditions. Variables occurring under actual working conditions may cause a slight variance to these specifications. In order to facilitate product improvements, specifications are subject to change without notice.
WARRANTY: Our systems are backed by a 3-year warranty.
